Aequa Series - Installation

Description
The Aequa Series is a rectified color body porcelain. It is the synthesis of digital technology applied to aesthetic research. Giving the appearance of a reclaimed wood, this series provides the warmth of timeworn matter that has taken on new colors and nuances over time. Because this material is a porcelain product, minimal maintenance is required. Aequa Series is available in two sizes, 8”x32”x10mm and 12”x48”x10mm. It is available in five colors. Numerous patterns can be created with the available sizes. When installing this tile with a staggered joint, the manufacturer recommends offset should not exceed 25%. Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

Recommended uses
Commercial & Residential
Interior & Exterior
Floor & Wall
Backsplashes
Countertops
Fireplaces
Tub Surrounds & Showers
Vanities

C.O.F. WET
Dynamic: 0.65
P.E.I. RATING
4
FROSTPROOF
Yes